The water guide duster is installed at the lower border of the component.
Through the hydrophilic groups of polymer materials, the water tension
on the surface of the water area is destroyed, and the water and dust at the
lower border of the border are timely guided to go over the border
and flow out in the process of accumulation (water). From the source
(formation stage), the problem of accumulation of water and dust at
the lower border of the component is solved.
Advantage
Features of the water-guided dusters
1.Stable, Efficient and Durable
2.Tight fit for optimal results
3.Structural optimization to prevent clogging
4.Simple installation and low cost
5.Easy to clean up to keep dry
The water-guided dusters are made of polymer hydrophilic material. The water-guided duster is installed at the lower frame of the module. The hydrophilic group of the polymer material destroys the water surface tension on the surface of the water accumulation area, and guides the water and dust at the lower frame in time during the accumulation process. It flows over the frame and solves the problem of water and dust accumulation at the lower frame of the module from the source.
Standard Voltage
|
3.2V RT@0.5C Discharge
|
3.2V RT@05C Discharge
|
Nominal Capacity
|
230Ah RT@0.5C Discharge
|
280Ah RT@0.5C Discharge
|
Voltage Range
|
2.0V-3.65V
|
2.0V-3.65V
|
Standard Charge
|
0.5C CC to 3.65V, 3.65V CV to 0.05C
|
Standard Voltage
|
3.15V/3.20V
RT@1C/0.33C Discharge
|
3.20V
RT@0.33C Discharge
|
3.0V
RT@0.33C Discharge
|
Nominal Capacity
|
46.5Ah/46.5Ah
RT@1C/0.33C Discharge
|
50Ah/50Ah
RT@1C/0.33C Discharge
|
32Ah/33Ah
RT@1C/0.33C Discharge
|
Voltage Range
|
2.0V~3.65V
|
2.0V-3.65V
|
1.5-3.95V
|
Max Charge Current
|
32.6A
|
50A
|
16A
|
Max Discharge Current
|
46.5A
|
50A
|
60A
|
Photovoltaic connector, also known as MC connector. In photovoltaic systems,
connectors account for a small proportion, but they are required in many links,
such as junction boxes, combiner boxes, and cable connections between
components and inverters.PV connector is divided into wire end and board end.
Generally speaking, pv Connector refers to wire metal parts and insulating parts.
Sunway MPPT charge controllers 24V 48V solar charge inverter charge controller for solar system
Model Number: |
R48L100 |
Reted PV Power: |
12V/24V/36V/48V |
Output Voltage: |
60V |
Size: |
380mm*210mm*80mm |
Weight: |
2.6-6.2KG |
Room 403, Floor 4, Building 7, Cross-Border E-Commerce Supervision Zone, 50 Meters North Of Huguang Road And Qianzhang Road, Hefei, Anhui, China
COPYRIGHT © 2023. SUNWAY SOLAR CO., LTD.丨ALL RIGHTS RESERVED.